SCOTCHKOTE LIQUID EPOXY 1 LITER

3M SCOTCHKOTE LIQUID EPOXY COATI

Flat Cables 3M Scotchkote Hot Melt Patch Compound 226P, 5 lb. Box, 1/Case

SCOTCH ADHESIVE ROLLER REPOSITIO

SCOTCH TACKY GLUE 020-CFT, 2 FL

3M SCOTCHKOTE LIQUID EPOXY COATI

3M SEALANT 730 UV, CLEAR, 305 ML

SCOTCH HIGH PERFORMANCE REPAIR G

3M SCOTCHKOTE LIQUID EPOXY COATI

3M™ Scotchcast™ Electrical Powder Resin 275, 50 lbs (22.7 Kg) carton

3M™ Scotchcast Electrical Resin 5555 is a one-part, green pigmented, rapid heat curing powder coating. It is designed to provide a continuous, tough moisture and chemical resistant dielectric coating for motor stators, armatures, and transformers. Electrical resin 5555 is manufactured by a fusion blend process, insuring that each individual particle of powder contains all the components necessary to effect a complete cure and attain stated performance properties. Resin 5555 can be applied via cold electrostatic fluid bed, hot venturi spray or hot fluid bed dip. When applied electrostatically to a cold part, induction heat is recommended to melt and flow the powder to a tough, moisture and chemical resistant dielectric coating for various electrical devices. When applied to a hot part the resin melts, flows to a controlled extent, then cures, bonding to the substrate and coalescing into a smooth, continuous, essentially uniform, thick dielectric coating. Resin 5555 has several gel times in order to accommodate those applications that need slightly higher flow, or for application equipment that requires rapid curing.

3M™ Scotchcast Electrical Resin 260 is a widely used, well-known general purpose epoxy powder resin. A one-part, green pigmented, rapid heat-curing product, it is designed to provide a continuous, tough, moisture and chemical resistant dielectric coating to a variety of substrates. It is manufactured by a fusion blend process, insuring that each individual particle of powder contains all the components necessary to effect a complete cure and attain stated performance properties. Resin 260 is applied to an object that has been heated to a temperature above the melting point of the resin. On contact with the preheated application surface, the resin melts, flows to a controlled extent, then cures, bonding to the substrate and coalescing into a smooth, continuous, essentially uniform, thick coating. It effectively coats flat surfaces and corners, as well as, high points. Uses for resin 260 include moisture-proofing and insulating armatures, stators, buss bars and toroid cores.

Scotchcast Electrical Resin 262 effectively coats flat surfaces and corners, as well as high points. Uses for resin 262 include moisture proofing and insulating armatures, stators, buss bars, and toroid cores.

3M™ Scotchcast Electrical Resin 282 is buff colored, can be applied by dipping, spraying, extruding or troweling. As dipping resin, 282 provides exceptionally smooth and uniform coatings with minimal runoff or sag during cure and is suggested for those applications requiring high temperature stability and permanent flexibility for thermal and mechanical shock resistance. examples are dipping and encapsulation of coils, transformers, motors, modules, strain- sensitive circuitry and other electrical and electronic components. Gel time is 23 min at 121(deg)C.

3M™ Scotchcast Electrical Resin 280 is characterized by a high temperature rating, outstanding physical and electrical stability and superior resistance to moisture. Resin system 280 remains flexible even after prolonged heat aging, while its low viscosity and fine wetting properties allow complete impregnation of fine wires in coils. Resin 280 is well suited to impregnating, potting and encapsulating applications that require superior electrical performance, maximum resistance to moisture and thermal shock resistance. Gel time is 20 min at 121(deg)C.

3M™ Scotchcast Electrical Resin 252 is a 100% solids thixotropic, rigid, Class F system, which is widely used in dip coating and wet winding applications where physical strength and excellent electrical properties at elevated temperatures are required. Smooth and uniform coatings can be achieved with minimal dripping or runoff during cure. Gel time is 21 min at 121(deg) C.

3M™ Scotchcast Electrical Resin 241 is a medium viscosity, semi-flexible, two-part, heat-curing, brown pigmented, 100% solids epoxy resin system. This general purpose resin system has built-in flexibility, good adhesion, terminal shock and impact resistance, and stable electrical and physical properties at 130(deg)C. (Class B) continuous operation. This filled resin system is used where higher thermal conductivity and greater mechanical strength are required.

3M™ Scotchcast Electrical Resin 235 system has permanent semi-flexibility, thermal shock and impact resistance, good electrical and adhesion properties. This low viscosity resin is well suited to a variety of general purpose, Class B applications. Its low viscosity and good wetting characteristics allow complete impregnation of even small coils, and it has the mechanical strength and flexibility needed for high quality insulation of large castings, such as motors, transformers, and coils. Gel time 18 min at 120(deg)C.

250-1GAL-10LBS/KIT# 3M(TM) Scotchcast(TM) Electrical Resin 250 (10 lb)

3M™ Scotchcast Electrical Resin 241 is a medium viscosity, semi-flexible, two-part, heat-curing, brown pigmented, 100% solids epoxy resin system. This general purpose resin system has built-in flexibility, good adhesion, terminal shock and impact resistance, and stable electrical and physical properties at 130(deg)C. (Class B) continuous operation. This filled resin system is used where higher thermal conductivity and greater mechanical strength are required.