3M™ Scotchcast Electrical Resin 253 is a 100% solids, two-part, oven-curing, semi-flexible, filled, brown epoxy resin capable of operating continuously at 130(deg)C. the thixotropic nature of this product renders it readily applicable by dipping, extrusion or trowelling in applications where resistance to running or sagging is a requirement. The properly cured product exhibits permanent flexibility, good adhesion, good thermal and mechanical shock resistance and good thermal conductivity. Typical examples of applications where this product can be used are as a conformal coating for coils, transformers, motors, modules, electrical and electronic components or assemblies, and for buttering motor turns. Gel time is 23 min at 120(deg)C.

3M™ Scotchcast Electrical Resin 282 is buff colored, can be applied by dipping, spraying, extruding or troweling. As dipping resin, 282 provides exceptionally smooth and uniform coatings with minimal runoff or sag during cure and is suggested for those applications requiring high temperature stability and permanent flexibility for thermal and mechanical shock resistance. examples are dipping and encapsulation of coils, transformers, motors, modules, strain- sensitive circuitry and other electrical and electronic components. Gel time is 23 min at 121(deg)C.

3M™ Scotchcast Electrical Resin 210 is a 100% solids, room-curing, epoxy resin system. It is suggested for insulating and sealing motor-winding end turns and slot sections. The two parts are mixed in a 1:1 ratio by weight. At room temperature the resin has a pot life of 1 to 1 1/2 hours and cures in 24-48 hours. This resin can be applied by spatula or by extrusion. It is useful for a variety of electrical sealing, caulking, filling, and patching applications. Gel time is 30 min at 60(deg) C.

3M™ Scotchcast Electrical Resin 10 has a thixotropic consistency that makes it useful for applications requiring a thick coating, a heavy layer, applied by spatula, extrusion, buttering or trowelling, cures with minimum sagging. The cured resin exhibits good physical properties, such as a high thermal and mechanical shock strength, strong adhesion, resistance to oil and fuel. It also exerts little stress on sensitive components. Typical applications include filling, patching, caulking, holding, spot repairing, lead anchoring and insulating by buttering end-turns of motor stator coils. Gel time 30 min at 60(deg)C.

3M™ Scotchcast Electrical Resin 9 is an easy-to-use resin system possessing medium viscosity and unique handling properties. It has a simple 1:1 mix ratio, a low toxicity potential and is frequently used in applications requiring excellent thermal shock and mechanical shock resistance. The resin`s low exotherm and pot life allow the user to mix substantial quantities at one time. High adhesion, low stress and low exotherm also reduce the effect of strain and temperature on sensitive components that have been coated with this resin. Gel time is 28 min at 60(deg)C.

3M™ Scotchcast Electrical Resin 226 is a rubbery castor-based polyurethane that combines very low viscosity with a good workable pot life and a demold time, at room temperature, of as little as six hours. Resin 226 maintains good electrical properties in both wet and dry environments. It also has long-term heat stability and good toughness. Resin 226 is used for a wide range of electrical and electronic potting and casting applications. It is formulated with materials that have low volatility at room temperature, minimizing toxicity potential. The isocyanate used is not TDI, and does not contain MOCA

3M™ Scotchcast Electrical Resin Primer 5136N is a one-part solvent-based primer designed to improve adhesion of low surface energy substrates for 3M™ Scotchcast Epoxy and Polyurethane Resins. It evaporates quickly for efficient throughput. This product replaced 3M™ Scotchcast Electrical Resin Primary 5136.

3M™ Scotchcast Electrical Resin MR283FO75 is a filled, epoxy resin system offering excellent physical, electrical and thermal properties. The filler minimizes shrinkage and stresses, and provides increased thermal conductivity and thermal shock resistance. Gel time is 30 min at 121(deg)C. Applications include impregnation and encapsulation of coils, transformers, motors and other electrical and electronic components.

3M™ Scotchcast Electrical Resin 8 is a low stress, highly moisture resistant compound that cures at room temperature. This epoxy resin system offers long pot life, low viscosity, a 1:1 mix ratio, Class B temperature rating and is used commonly to coat circuit boards, pot connectors, and impregnate electrical and electronic components. Because of its low exotherm, resin 8 is also frequently specified for impregnating and encapsulating temperature sensitive units. Gel time is 30 min at 60(deg)C.

3M™ Scotchcast Electrical Resin 8 is a low stress, highly moisture resistant compound that cures at room temperature. This epoxy resin system offers long pot life, low viscosity, a 1:1 mix ratio, Class B temperature rating and is used commonly to coat circuit boards, pot connectors, and impregnate electrical and electronic components. Because of its low exotherm, resin 8 is also frequently specified for impregnating and encapsulating temperature sensitive units. Gel time is 30 min at 60(deg)C.

3M™ Scotchcast Electrical Resin 226 is a rubbery castor-based polyurethane that combines very low viscosity with a good workable pot life and a demold time, at room temperature, of as little as six hours. Resin 226 maintains good electrical properties in both wet and dry environments. It also has long-term heat stability and good toughness. Resin 226 is used for a wide range of electrical and electronic potting and casting applications. It is formulated with materials that have low volatility at room temperature, minimizing toxicity potential. The isocyanate used is not TDI, and does not contain MOCA

3M™ Scotchcast Electrical Resin 9 is an easy-to-use resin system possessing medium viscosity and unique handling properties. It has a simple 1:1 mix ratio, a low toxicity potential and is frequently used in applications requiring excellent thermal shock and mechanical shock resistance. The resin`s low exotherm and pot life allow the user to mix substantial quantities at one time. High adhesion, low stress and low exotherm also reduce the effect of strain and temperature on sensitive components that have been coated with this resin. Gel time is 28 min at 60(deg)C.

3M™ Scotchcast Electrical Resin 251 is a medium viscosity, rigid, Class F resin system widely used where physical strength and excellent electrical properties at elevated temperatures are required. An easy 1:1 mix ratio and good handling characteristics have contributed to the products popularity.

3M™ Scotchcast Electrical Resin 9 is an easy-to-use resin system possessing medium viscosity and unique handling properties. It has a simple 1:1 mix ratio, a low toxicity potential and is frequently used in applications requiring excellent thermal shock and mechanical shock resistance. The resin`s low exotherm and pot life allow the user to mix substantial quantities at one time. High adhesion, low stress and low exotherm also reduce the effect of strain and temperature on sensitive components that have been coated with this resin. Gel time is 28 min at 60(deg)C.

3M 08752 Rearview Mirror Adhesive, 0.02 oz, Tube, Clear, Methacryate Base,

3M 1300L NEOPRENE RUBBER AND GAS

Adhesive,Epoxy - 2 Part, Grey, Cartridge, 400 ml

Adhesive,Epoxy - 2 Part, Grey, Cartridge, 48.5 ml

Structural Plastic Adhesive Rohs Compliant: Yes /3M DP8005, WHITE, 45ML

Adhesive,Epoxy - 2 Part, Black, Cartridge, 400 ml