Локаль
Язык
- English
- русский
Валюта
- CNY-¥
- RUB-₽
Цена такой валюты может меняться в зависимости от курса только для справки
E-Switch KAP1103E technical specifications, attributes, parameters and parts with similar specifications to Silicon Labs SI1084-A-GM.
| Свойство продукта | Значение свойства | |
|---|---|---|
| Классификация | DIP Switches | |
| Марка | E-Switch | |
| Factory Lead Time | 11 Weeks | |
| Mount | Through Hole | |
| Mounting Type | Through Hole, Right Angle | |
| Body Material | Polybutylene Terephthalate (PBT), Glass Filled | |
| Contact Materials | Phosphor Bronze | |
| ElectricalLife | 2,000 Cycles | |
| Insulation Materials | GLASS FILLED POLYESTER | |
| Voltage Rated | 24VDC | |
| Operating Temperature | -40°C~85°C | |
| Packaging | Tube | |
| Series | KAP | |
| Published | 2003 | |
| Part Status | Active | |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | |
| Termination | PC Pin | |
| ECCN Code | EAR99 | |
| Number of Positions | 3Positions | |
| Voltage - Rated DC | 24V | |
| Pitch | 0.100 2.54mm Full | |
| Current Rating | 25mA | |
| Contact Finish | Gold |
| Свойство продукта | Значение свойства | |
|---|---|---|
| Termination Style | PC Pin | |
| Body Breadth | 10.795 mm | |
| Actuator Type | Piano | |
| Circuit | SPST | |
| Contact Resistance | 0.05mOhm | |
| Insulation Resistance | 100000000Ohm | |
| Contact Current(DC)-Max | 0.1A | |
| Contact Voltage(DC)-Max | 50V | |
| Dielectric Withstanding Voltage | 500VRMS V | |
| Mechanical Life | 2,000 Cycles | |
| Contact Timing | MAKE-BEFORE-BREAK | |
| Contact (DC) Max Rating R Load | 0.1A@50VDC | |
| Number of Switch Sections | 3Switch Sections | |
| PCB Hole Count | 6 | |
| Contact Function | OFF-(ON) | |
| Washable | No | |
| Actuator Level | Raised | |
| Solderability | WAVE | |
| Length | 0.361 9.17mm | |
| Body Height | 10.1854mm | |
| Height Above Board | 0.402 10.20mm | |
| RoHS Status | ROHS3 Compliant |