Локаль
Язык
- English
- русский
Валюта
- CNY-¥
- RUB-₽
Цена такой валюты может меняться в зависимости от курса только для справки
NXP USA Inc. NE5234D/01,512 technical specifications, attributes, parameters and parts with similar specifications to Silicon Labs SI1084-A-GM.
| Свойство продукта | Значение свойства | |
|---|---|---|
| Классификация | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps | |
| Марка | ||
| Mounting Type | Surface Mount | |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) | |
| Surface Mount | YES | |
| Operating Temperature | 0°C~70°C | |
| Packaging | Tube | |
| Published | 2011 | |
| JESD-609 Code | e4 | |
| Pbfree Code | yes | |
| Part Status | Obsolete | |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | |
| Number of Terminations | 14Terminations | |
| Terminal Finish | NICKEL PALLADIUM GOLD | |
| Terminal Position | DUAL | |
| Terminal Form | GULL WING | |
| Peak Reflow Temperature (Cel) | 260 | |
| Number of Functions | 4Functions | |
| Supply Voltage | 5.5V | |
| Terminal Pitch | 1.27mm | |
| Reach Compliance Code | unknown | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Base Part Number | NE5234 | |
| Pin Count | 14 |
| Свойство продукта | Значение свойства | |
|---|---|---|
| Qualification Status | Not Qualified | |
| Output Type | Rail-to-Rail | |
| Power Supplies | +-1/+-2.75/2/5.5V | |
| Number of Circuits | 4Circuits | |
| Current - Supply | 2.8mA | |
| Slew Rate | 0.8V/μs | |
| Architecture | VOLTAGE-FEEDBACK | |
| Amplifier Type | General Purpose | |
| Common Mode Rejection Ratio | 90 dB | |
| Current - Input Bias | 90nA | |
| Voltage - Supply, Single/Dual (±) | 2V~5.5V ±1V~2.75V | |
| Unity Gain BW-Nom | 2500 kHz | |
| Average Bias Current-Max (IIB) | 0.1μA | |
| Low-Offset | NO | |
| Frequency Compensation | YES | |
| Supply Voltage Limit-Max | 7V | |
| Voltage - Input Offset | 200μV | |
| Micropower | YES | |
| -3db Bandwidth | 2.5MHz | |
| Bias Current-Max (IIB) @25C | 0.07μA | |
| Voltage Gain-Min | 32000 | |
| Length | 8.65mm | |
| Height Seated (Max) | 1.75mm | |
| RoHS Status | ROHS3 Compliant |