Локаль
Язык
- English
- русский
Валюта
- CNY-¥
- RUB-₽
Цена такой валюты может меняться в зависимости от курса только для справки
STMicroelectronics VND600PEP-E technical specifications, attributes, parameters and parts with similar specifications to Silicon Labs SI1084-A-GM.
| Свойство продукта | Значение свойства | |
|---|---|---|
| Классификация | PMIC - Power Distribution Switches, Load Drivers | |
| Марка | STMicroelectronics | |
| Factory Lead Time | 42 Weeks | |
| Mount | Surface Mount | |
| Mounting Type | Surface Mount | |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) | |
| Number of Pins | 24Pins | |
| Operating Temperature | -40°C~150°C TJ | |
| Packaging | Tube | |
| Pbfree Code | yes | |
| Part Status | Active | |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) | |
| Number of Terminations | 24Terminations | |
| ECCN Code | EAR99 | |
| Resistance | 30mOhm | |
| Max Power Dissipation | 96W | |
| Terminal Position | DUAL | |
| Terminal Form | GULL WING | |
| Number of Functions | 1Function | |
| Supply Voltage | 13V | |
| Terminal Pitch | 0.8mm | |
| Base Part Number | VND600 | |
| Pin Count | 24 | |
| Number of Outputs | 2Outputs |
| Свойство продукта | Значение свойства | |
|---|---|---|
| Output Type | N-Channel | |
| Max Output Current | 40A | |
| Operating Supply Voltage | 36V | |
| Interface | On/Off | |
| Nominal Supply Current | 6mA | |
| Output Configuration | High Side | |
| Power Dissipation | 96W | |
| Output Current | 25A | |
| Voltage - Supply (Vcc/Vdd) | Not Required | |
| Max Supply Current | 6mA | |
| Input Type | Non-Inverting | |
| Switch Type | General Purpose | |
| Min Input Voltage | 5.5V | |
| Max Input Voltage | 36V | |
| Ratio - Input:Output | 1:1 | |
| Voltage - Load | 5.5V~36V | |
| Driver Number of Bits | 2Bits | |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage | |
| Rds On (Typ) | 30m Ω (Max) | |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE | |
| Length | 10.3mm | |
| Width | 7.5mm | |
| Radiation Hardening | No | |
| RoHS Status | ROHS3 Compliant |