AUTONICS EC-3 Encoder Coupling, Bore 10mm, O D 22mm

TERMINAL BLOCK

3M COLD SHRINK SILICONE INSULATOR 8447-3.2, TAPE, WIRE, UNISHIELD, STANDARD, 12 PER CASE

"""3M™ Cold Shrink Insulator 8426-9, 2/0 AWG-250 kcmil (70-125 mm²),10/case"""

Toggle Switches ELECTRO

3M™ Cold Shrink Tubes are designed using a unique Cold Shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwind) after positioning allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated material ensures a permanent, durable environmental seal and insulation.

3M™ Cold Shrink Quick Insulator QI 10/37-270 provides a quick solution for a wide range of cable sizes. It combines the environmental seal of mastic with the reliability of 3M™s field-proven cold shrink technology. Each cold shrink tube has factory-installed mastic rings in each end to provide added protection and range taking capability. Fits cable size range of 2 AWG - 500 kcmil for aluminum connectors and 2 AWG - 750 kcmil for copper connectors.QI series insulators are easily installed by hand with no tools. They seal tightly with excellent wet electrical properties and are tested to requirements of ANSI C119.1. They are recommended for such applications as secondary inline splices, especially in tight spaces or on cable racks, with imperfect or scarred cable jackets, and for splices in which the cable can only be removed from one side. Also recommended for dig-in and sheath repair splices, street lighting, sealing connections or switchgear, transition connectors and set-screw or oversized connectors, and for retrofitting and repairing cable leads for secondary transformers.

The 3M™ Cold Shrink Low Voltage QSLV-M provides quick, reliable insulation and protection for secondary low-voltage splices. The 8-2/0 tube fits 2 AWG to 500 kcmil. Mastic rings at each end provide remarkably wide wire range. In fact, the two QSLV-M tubes together offer 3 times the wire range on traditional cold applied products. After installation, a solid internal core remains inside to protect against impact damage. Installation is easy with no torch or tools required. It provides reliable sealing and long-term durability. , even after years of aging and exposure. QSLV-M tubes are designed to resist fungus, acids and alkalies, and have passed testing for ANSI C119.1. It can be used for direct bury or submersible applications on either aluminum or copper splices.

The 3M™ Cold Shrink Low Voltage QSLV-M provides quick, reliable insulation and protection for secondary low-voltage splices. The 8-2/0 tube fits 8 AWG to 2/0 AWG and is designed as primary electrical insulation for solid dielectric insulated wire and cable splices rated to 1,000 volts. Mastic rings at each end provide remarkably wide wire range. In fact, the two QSLV-M tubes together offer 3 times the wire range on traditional cold applied products. After installation, a solid internal core remains inside to protect against impact damage. Installation is easy with no torch or tools required. It provides reliable sealing and long-term durability. , even after years of aging and exposure. QSLV-M tubes are designed to resist fungus, acids and alkalies, and have passed testing for ANSI C119.1. It can be used for direct bury or submersible applications on either aluminum or copper splices.

These kits are designed to be used with copper compression lugs. After being crimped onto the cables, the lugs are bolted together, then insulated and sealed with the 3M™ Motor Lead Splicing Kits. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlock Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used.

These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. The 5730 series accommodates a full range of cable sizes from 14 AWG-750 kcmil. The overall jacket diameter ranges from 0.62 to 4.0 (16 to 102 mm). For use with 3/C Armor Power Cable (Teck 90) up to 1000V.

These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. The 5730 series accommodates a full range of cable sizes from 14 AWG-750 kcmil. The overall jacket diameter ranges from 0.62 to 4.0 (16 to 102 mm). For use with 3/C or 4/C Armor Power Cable CSA Certified for 600V or less.

Each kit contains all the materials (except connectors) required to construct one three-conductor splice on shielded or non-shielded, armored or non-armored cables. Each kit makes one splice.

These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. The 5730 series accommodates a full range of cable sizes from 14 AWG-750 kcmil. The overall jacket diameter ranges from 0.62 to 4.0 (16 to 102 mm). For use with 3/C Armor Power Cable (Teck 90) up to 1000V.

3M™ Cold Shrink Tubes are designed using a unique Cold Shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwind) after positioning allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated material ensures a permanent, durable environmental seal and insulation.

These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. The 5730 series accommodates a full range of cable sizes from 14 AWG-750 kcmil. The overall jacket diameter ranges from 0.62 to 4.0 (16 to 102 mm). For use with 3/C Armor Power Cable (Teck 90) up to 1000V.

This corrosion protection kit is designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments. 10 per case.

This corrosion protection kit is designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments. 10 per case.

This corrosion protection kit is designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments. 5 per case.

3M™ Cold Shrink Tubes are designed using a unique Cold Shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwind) after positioning allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated material ensures a permanent, durable environmental seal and insulation.