3M™ Filament Tape 1139, 3/8 in x 60 yd, Plastic Core

3M™ Reinforced Polyester Film/Mat Tape 1146, 6.5 mil, 1/4 in x 60 yd, Trans

3M™ 1339 Filament-Reinforced Electrical Tape is solvent resistant, and offers good tensile strength and edge-tear resistance for holding applications. UL recognized for use at temperatures to 266(deg)F (130(deg)C).

The 3M™ Connector CI-1/0A is used with molded rubber splices 3M™ 5420 Series, 3M™ 5461 splice kit, and 3M™ 5450 Series. It has a connector O.D. of 0.91 inch and a minimum order case quantity of 10 each.

The 3M™ Connectors CI Series are for splicing applications on aluminum or copper cable conductors. The aluminum connectors CI Series are specially designed for use with 3M™ Pre-molded Power Cable Splice Bodies QS-I, QS-II and QS-III. These connectors meet the requirements of ANSI C119.4.

The 3M™ Connectors CI Series are for splicing applications on aluminum or copper cable conductors. The aluminum connectors CI Series are specially designed for use with 3M™ QS-I, QS-II and QS-III pre-molded power cable splice bodies. These connectors meet the requirements of ANSI C119.4.

The 3M™ Connectors CI Series are for splicing applications on aluminum or copper cable conductors. The aluminum connectors CI Series are specially designed for use with 3M™ QS-I, QS-II and QS-III pre-molded power cable splice bodies. These connectors meet the requirements of ANSI C119.4.

The 3M™ Connectors CI Series are for splicing applications on aluminum or copper cable conductors. The aluminum connectors CI Series are specially designed for use with 3M™ QS-I, QS-II and QS-III pre-molded power cable splice bodies. These connectors meet the requirements of ANSI C119.4.

3M™ Electrical Moisture Block (EMB) is a self-fusing, rubber based insulating adhesive/selaant designed to prevent the migration of water along harness wiring. EMB block is supplied on a release liner and offered in three standard sizes to accommodate different size wire bundles. It is compatible with typical wire insulation such as PVC, Hypalon® and crosslinked polyethylene.

3M™ Electrical Moisture Block (EMB) is a specially formulated rubber adhesive/sealant for moisture proofing wire bundles.

3M™ Scotchcast Electrical Resin 210 is a 100% solids, room-curing, epoxy resin system. It is suggested for insulating and sealing motor-winding end turns and slot sections. The two parts are mixed in a 1:1 ratio by weight. At room temperature the resin has a pot life of 1 to 1 1/2 hours and cures in 24-48 hours. This resin can be applied by spatula or by extrusion. It is useful for a variety of electrical sealing, caulking, filling, and patching applications. Gel time is 30 min at 60(deg) C.

3M™ Scotchcast Electrical Resin 5 is a transparent resin and offers good physical and electrical properties plus low viscosity for maximum impregnating qualities. Gel time is 18 min at 60(deg) C.

3M™ Saturated Glass Cloth Tape 90 is a white woven glass cloth tape coated with a rubber, thermosetting adhesive. Saturated for a stiffer backing, it offers high mechanical strength and high temperature resistance. It works well with electrical insulating resins and varnishes. 1/2 x 60 yards on 3 core. Well suited for stick- and bobbin-wound coils and transformers as well as end turns and connections in motors.

3M™ Glass Cloth Tape 79 is a woven insulating glass cloth tape featuring an acrylic, pressure-sensitive adhesive to electrically insulate and provide mechanical protection at temperatures to 150(deg)F. Used for banding and strapping applications up to 150(deg)C. 3M™ Glass Cloth Tape 79 provides insulation and solvent-resistant protection for use as coil cover, anchor, banding and core, layer and crossover insulation. This tape is edge-tear resistant and conformable. Printable.

Scotch® Glass Cloth Tape 27 is edge-tear resistant, comformable, abrasion resistant; for use as a coil cover, anchor, banding and core, layer and crossover insulation. This tape is used for heat-stable insulation for furnace and oven controls, motor leads, and switches.

Scotch® Glass Cloth Tape 27 is edge-tear resistant, comformable, abrasion resistant; for use as a coil cover, anchor, banding and core, layer and crossover insulation. This tape is used for heat-stable insulation for furnace and oven controls, motor leads, and switches.

Scotch® Glass Cloth Tape 69 is edge-tear resistant conformable, high-temperature flame resistant adhesive; for use as a coil cover, anchor, for banding and core, layer and crossover insulation. Printable. Recommended for use with Scotch® Electric Arc-Proofing Tape 77.

3M™ Glass Cloth Electrical Tape 69 is edge-tear resistant conformable, high-temperature flame resistant adhesive; for use as a coil cover, anchor, for banding and core, layer and crossover insulation. Printable.

3M™ Glass Cloth Tape 79 is a woven insulating glass cloth tape featuring an acrylic, pressure-sensitive adhesive to electrically insulate and provide mechanical protection at temperatures to 150(deg)F. Used for banding and strapping applications up to 150(deg)C. 3M™ 79 Glass Cloth Tape provides insulation and solvent-resistant protection for use as coil cover, anchor, banding and core, layer and crossover insulation. This tape is edge-tear resistant and conformable. Printable.

Scotch® Glass Cloth Tape 27 is edge-tear resistant, comformable, abrasion resistant; for use as a coil cover, anchor, banding and core, layer and crossover insulation. This tape is used for heat-stable insulation for furnace and oven controls, motor leads, and switches.